Heat Pump Costs in Perth
Last updated 1 November 2026 · Reviewed by the Scottish Energy Efficiency team

Can a heat pump be installed in a Perth Victorian townhouse?
Yes. The survey checks solid-wall heat loss, glazing, and which radiators need upgrading to suit the lower flow temperatures a heat pump uses.
Perth's city centre and the areas around the Tay have a strong stock of Victorian sandstone townhouses and villas — solid-walled stone buildings with high ceilings and sash windows, built for coal and later converted to gas central heating. The radiators in these homes were sized for a hot boiler, so when moving to a heat pump running at lower flow temperatures, several usually need upgrading to deliver the same warmth. Because the walls are solid, the survey also looks at what insulation is practical — loft insulation where accessible, draught-proofing of original windows, and solid wall insulation where appropriate and permitted. We size the heat pump to your actual measured heat loss, room by room, so the system is neither undersized nor larger than it needs to be.
Are the modern estates around Perth good candidates for heat pumps?
Yes. Newer builds meet modern insulation standards and usually need less preparation. The survey still confirms correct sizing and flow temperature for your property.
The newer housing estates on the outskirts of Perth — around Scone, Bridge of Earn and the developments to the north of the city — were built to current insulation standards, with cavity walls, double glazing and insulated lofts. Their heating systems were designed around lower heat loss, which makes them straightforward candidates for a heat pump. The radiators may still have been sized for a gas boiler, so the survey checks whether they suit a heat pump's lower flow temperature; in well-insulated homes, the answer is often yes. That keeps preparation modest and running costs down. Even in a modern home, the survey matters because exposure, orientation and the number of external walls all affect heat loss.
Do you cover the rural Tayside countryside around Perth?
Yes. We survey and install across the rural outskirts and wider Tayside, including off-gas-grid cottages and farmsteads heated by oil or LPG, which are often strong heat pump candidates.
Perth sits at the heart of Tayside, and the surrounding countryside stretches out into rural Perthshire and towards the Angus glens. Many of the properties out there — stone cottages, farmsteads and rural homes around Crieff, Auchterarder, Blairgowrie and beyond — are off the gas grid and heated by oil or LPG. For these homes, a heat pump can be particularly worthwhile: the running-cost comparison against oil is more favourable than against gas, and removing the tank eliminates deliveries, theft risk and the maintenance of an ageing tank. We survey rural properties the same way as city ones, measuring heat loss room by room and accounting for the greater exposure that comes with an isolated location. The system is sized to handle the colder rural design temperature.
How do heat pumps perform in exposed rural cottages near Perth?
Well, when correctly sized. The survey accounts for exposure and uses a design temperature reflecting colder rural conditions, so the system handles winter comfortably.
Rural cottages around Perth and into the Strathearn valley can be more exposed than city homes, with open views, fewer neighbouring buildings to break the wind, and sometimes solid stone walls with limited insulation. None of that rules out a heat pump, but it does mean the survey has to be thorough. We account for the property's exposure, the local design outdoor temperature, and the actual heat loss through the walls, roof and windows. A correctly sized system — specified for the coldest expected days in that location — keeps the cottage warm through a Tayside winter. We also look at where the external unit sits, sheltering it from prevailing wind where possible. An undersized system struggles; a properly surveyed one does not.
Is a heat pump worth it if my Perth home is on the gas grid?
It can be. The decision depends on your heat loss, insulation, and whether you want to move away from gas. A survey gives an honest running-cost comparison for your home.
Perth itself is largely on the gas grid, so for many city households the comparison is against a gas boiler rather than oil. Gas is relatively cheap per unit, so whether a heat pump costs less to run depends on how well your home holds heat and how efficiently the system is set up. Some households switch because their boiler is nearing the end of its life and they want a long-term solution; others want to move away from fossil fuels. We do not pretend the case is the same as for an off-grid home. After the survey, we give you honest numbers — a realistic running-cost comparison for your actual property, including what preparation is needed. If a heat pump does not make sense for your home, we tell you.
Want a figure for your Perth home?
A full heat loss survey comes first, then a written, itemised quote. Installation through our MCS-certified partners.
Frequently asked questions
Heat pump questions for Perth
Yes. The survey checks the solid-wall heat loss, glazing, and which radiators need upgrading to suit the lower flow temperatures a heat pump uses.
Yes. Newer builds meet modern insulation standards and usually need less preparation. The survey still confirms correct sizing and flow temperature for your property.
Yes. We cover the rural outskirts and wider Tayside, including off-gas-grid cottages and farmsteads heated by oil or LPG, which are often strong heat pump candidates.
Well, when correctly sized. The survey accounts for exposure and uses a design temperature that reflects colder rural conditions, so the system handles winter comfortably.
It can be. The decision depends on your heat loss, insulation, and whether you want to move away from gas. A survey gives an honest running-cost comparison for your home.
Areas we cover
Nearby areas
We survey and install across Perth and the surrounding area, including Bridge of Earn, Scone, Crieff, Auchterarder, Blairgowrie, Coupar Angus.
- Bridge of Earn
- Scone
- Crieff
- Auchterarder
- Blairgowrie
- Coupar Angus
Related guides
Keep reading
Get a quote
Ready for a real heat pump quote?
Fill in the form and we will call you back to book a full survey. No obligation, no single price before we have seen your house.
- 0141 230 0198
- Message us on WhatsApp
- info@scottishenergyefficiency.co.uk
- Unit 3 Prospect III, Prospect Business Centre, Dundee DD2 1TY

Get a quote
Fields marked * are required. We will call you back to book your survey.